Untitled Document
» Store » Inverter Off-Grid » Magnum » MS-PAE Series - MS4448PAE

MS-PAE Series - MS4448PAE

Price: $0.00

The MS-PAE 120/240V Series Inverter / Charger from Magnum Energy is
a pure sine wave inverter designed specifically for the most demanding
renewable energy applications. The MS-PAE Series is powerful, easy-touse,
and best of all, cost effective.


No series stacking required: The unique design of the MS-PAE Series
can provide 120 and 240 volts output in one unit, eliminating the need
to stack two units together to get 240 volts.


Parallel stacking: You can parallel up to four inverter / chargers for up
to 17.6kw of power at 120/240V. The MP panels and router are required
for parallel stacking the MS-PAE Series.


Power Factor Corrected (PFC) Charger: Our PFC charger is
built into all of our inverter chargers. It uses less energy from a
generator than a standard charger – using 25-30% less AC current
than standard chargers.


Safe and reliable: The MS-PAE Series is ETL Listed to the stringent
requirements of UL 1741, 1st edition, and CSA C22.2 #107.1-01 for
renewable energy installations.

Features

Pure sine wave: Power your
T.V.s, stereos, plasma screens,
and other sensitive electronics
without worry. The pure sine
wave inverter and power factor
corrected charger provide clean,
reliable inverter power with low
total harmonic distortion (THD)
of less than 5%.


Choices: The MS-PAE Series
comes in 24 and 48 volt
configurations, allowing you
to choose the model that
is right for you.

Versatile mounting:
Mount the MS-PAE Series
on a shelf or wall.


Lightweight: The lightweight
aluminum base and cover also
provides noise reduction and
corrosion resistance.


Multiple ports: The MS-PAE
Series provides multiple
ports, including an RS485
communication port for network
expansion, and a remote port.

Accessible design: The extra
large AC access cover with
terminal screw block and 360°
DC connection terminals with
covers make this inverter more
accessible when it needs to be.

Convenient switches: The MSPAE
Series comes with an on/off
inverter-mounted switch with an
easy-to-read LED indicator.

Buy with ease:
The MS-PAE Series is backed by
a three-year (36-month) limited
warranty, and a five-year limited
warranty when installed on an
MMP or MP system.

» Continue Shopping

Solar Panels in a system and powerspout water turbine with MPPT controllers and Hybrid inverters from DNM Solar

When you buy solar panels from us we ship solar panels, off grid kits, gridtie kits, and systems across Canada

been selling solar panels since 2011

Please contact us, we would be more than happy to speak with you about implementing renewable energy solutions

We have shipped Solar panels with Inverters and batteries across Canada since 2011 any where from NL, New Brunswick, NS, PE, Montreal, Quebec, ON, MN, SK, Alberta, BC
Purchased Solar Panels from us have been shipped to Toronto, Victoria BC, Vancouver BC, Kamloops BC, Kelowna BC, edmonton AB, Calgary AB, Winnipeg MN, Prince Rupert, Nova Scotia, PEI
Earth receives a HUGE amount of solar radiation every day. About 30% of it is reflected back to space, the rest falls on clouds, land and the oceans. Solar radiation (sunlight) is used in generating electricity. Solar power is the conversion of sunlight into electricity using photovoltaics (PV), PV converts light into electric current using the photoelectric effect. Next the Direct Current (DC) that is generated by the PV panels is converted to Alternating Current (AC) by means of an inverter so it can be connected and fed back to the utility lines.
For a microFIT subscriber the generated power from the solar panels and inverter is measured by means of a standard meter and the total power generated is paid at the end of each month. In Ontario (44 degrees) sunlight average is about 3~4 hours per day per year, that means (lets pick 3 hours), 3 x 365 = 1,095 hours of sunlight. If you have 1, 250W panel say from "Canadian Solar", that would mean 1,095h x 250W = 273,750W or 273.750KW of power in 1 year. microFIT allows up to a one 10KW system, which means 10,000W/250=40 panels (250W each and installed on a dual axis tracker for optimum production). Therefore 273,750W x 40= 10,950,000 W or 10.950MW of power / Year in Ontario.
MPPT vs PWM charge controllers Is there s a difference? Question always comes up, is MPPT better than PWM when charging with a solar panel? Answer: A BIG YES Here is why... (assuming perfect conditions) PWM When you connect a PWM charge controller to a 250W solar panel charging a 12V battery, the controller puts out the maximum current the panel produces out, 8A in this case, but only takes 12V from the panel to charge the battery. 12V x 8A = 96W is what the controller puts out to charge the battery, while the panel is capable of 250W. MPPT In this case the controller looks for the best power point from the 250W panel by sweeping the Voltage and Current lines from 0 to MAX and once it has found it, it starts to convert the MAX power into charging the 12V battery. 250W panel puts 30V and ~8A current out. 250W / 12V = 20A MPPT controller will put out 12V and 20A of current into charging the battery, it takes 30V and 8A from the panel. At $180 for a basic TS45A PWM charge controller, your charge current is 8A At $350 for a Phocos MPPT controller your charge current is 20A This means: You will spend ~3 times less time to charge the battery with an MPPT controller. You are spending less than 2 times on the MPPT controller. You decide which one is the right controller for you.
Here is an excellent source of knowledge from the PowerSpout designers. Please take a look at what they have to offer. "Even a small stream can generate consistent, clean, dam free, renewable electricity at a price per Watt lower than wind. A single PowerSpout at a site good enough to generate 1kW can produce enough electricity for a typical house for a year (greater than 8,000 kWh per year). The small (18 inches wide), all-weather PowerSpout PLT is one of the most reliable, cost-effective generators around because we have spent a decade making micro-hydro efficient and affordable"
Net-Metering What is it? It's meant to reduce your yearly purchase from the grid You will generate green power and use it, extra generation will go to the grid. Your local Hydro company will store this extra power produce from the solar panels, like a battery. You get to use the stored power for free until it runs out. system could be sized such that your yearly need is 0KWh from the grid. You would only pay an admin fee. Payback at current rates is about 4 years. You will not pay, debt retirement, losses and all the other parts they add on top of your bill. electricty cost is going up 33% in the next 3 years... The system is identical to a microFIT setup Solar Panels plus grid tie inverter to a secondary meter to measure and pay you. The difference is where you connect Solar Panels in a solar system plus grid tie inverter to your existing electrical panel to save you money.